All technical details at a glance: Here you will find the official SISO data sheets for our systems. Download the PDFs and learn everything about load values, materials, mounting principles and application possibilities.
SISO Vertical 90° provides acyclic power and is ideally suited for designing areas on biodiversity-friendly green roofs and in alpine regions. The system distinguishes itself from other vertical support structures with its fully integrated cable routing and variable support lengths. The modules are freely selectable in both height and width, thus offering maximum planning convenience and ease of maintenance.
SISO Butterfly 20° is the most widely installed system on green roofs. The solar table facilitates efficient cable routing and module installation. The support design allows for easy, automated roof maintenance. Continuous soil reinforcement minimizes the required ballast in borderline areas. The Butterfly 20° can be freely combined with 90°, 75°, and 45° angles, leaving no design requirements unmet.
Here you will find information on the design and technical specifications of the SISO Solar Attic 45°. An overview of the system advantages, the integrated collective protection, and the combination of fall protection and energy generation is presented. Furthermore, technical fundamentals, the mounting system, and important requirements for planning, installation, and maintenance are explained.
Here you will find information on the structure and technical specifications of the SISO Solar Fir 75°. An overview of the system advantages, the robust construction, and the modular design of the mounting system is also provided. Furthermore, technical fundamentals, application possibilities on green and metal roofs, and important requirements for planning and installation are explained.
SISO Aloha 15°K is designed for metal, bare, and gravel roofs. With excellent surface utilization, even static challenges can be easily overcome thanks to the base reinforcement.
SISO Aloha 20°G is the east/west variant for multi-family dwellings in urban areas. Its design directs water and biomass away from the center towards the service corridor, minimizing runoff beneath the modules. The Aloha 20° is easy to construct, requires little maintenance, and can even be built on green roofs.
The SISO Solarwing 75° was developed for mounting on elevated surfaces in alpine zones and on biodiversity-enhancing green roofs, with a south-facing orientation. Its ingenious design allows for adaptation to on-site conditions. Thanks to its bifacial modules and a steep tilt, the Solarwing performs exceptionally well and is suitable for all roof shapes.
SISO pitched roof systems on trapezoidal sheet metal are pull-out resistant and quick to install thanks to a patented screw channel. The short rail system is suitable for any roof pitch and functionally serves as a walkway on steep and smooth surfaces. The 74 mm height ensures maximum ventilation behind the PV modules.
SISO pitched roof systems for tiles and fiber cement are designed for single-layer or cross-bonded installation. Their high load-bearing capacity ensures maximum safety for canopies, chimneys, and skylights. With the strongest roof hooks and snow guards, all requirements for pitched roof design are met. The modules are laid and clamped in a combined manner, utilizing the advantages of module support and potential connection.
The SISO facade system can be installed either as a suspended, cross-braced system or directly embedded onto sheet metal. The modules are inserted and clamped in a combined manner, utilizing the advantages of module support and potential connection.
The SISO inverter box can be prefabricated by the installer or built on-site. The frame construction can be adapted to specific requirements and supplemented with infill panels for aesthetic, weatherproofing, rodent protection, or sound insulation.
The SISO facade system can be installed either as a suspended, cross-braced system or directly embedded onto sheet metal. The modules are inserted and clamped in a combined manner, utilizing the advantages of module support and potential connection.
SISO pitched roof systems for tiles and fiber cement are designed for single-layer or cross-bonded installation. Their high load-bearing capacity ensures maximum safety for canopies, chimneys, and skylights. With the strongest roof hooks and snow guards, all requirements for pitched roof design are met. The modules are laid and clamped in a combined manner, utilizing the advantages of module support and potential connection.
Our experts and SISOnauts are happy to help. Perhaps your most pressing questions will be answered in our "Frequently Asked Questions" section. And if not, you can contact us anytime.